-Download the program below -Connect the printer directly to the computer without usb hub
-Power connection should be stable
-POWER INTERRUPTION DURING INITIALIZATION MAY CAUSE PERMANENT DAMAGE
-Disable Antivirus
-Open AdjProg.exe
-Click “Accept” button
-Click “Particular adjustment mode” button
-Select on “Waste ink pad counter”
-Select on Main pad counter
-click on "CHECK" to view the current value
-It should show above 100%, IF ERROR, CHECK CONNECTION
-DO NOT CONTINUE UNTIL YOU SEE THE PERCENTAGE
-IF YOU INITIALIZE WITH ERROR, PRINTER MAY HAVE PERMANENT DAMAGE >>>>continue when you see the percentage
-click on “Initialization” button and the program will reset the protection counter
-If successful, it will ask you to turn off the printer
-Turn off the printer, then turn on again
-You may "CHECK" again to view the current value and should show less than 100%
-Click “Finish” button
-Enable Antivirus
-Done! |